Start-Up; Installation On The Ground, Using The Ground Spike - Parkside PTUS 1 A1 Instructions D'utilisation Et Consignes De Sécurité

Start-up

The product is protected against splash water and is also suitable for
outdoor use. Ensure that all seals
cover and on the USB socket
8
There are two possible installation options:
Installation on the ground, using
the ground spike
The enclosed ground spike
comes in three parts (see Fig. C), but for low installation heights,
one part can be used on its own. Never place the product directly
onto the ground: it can be flooded in heavy rain.
Push the point of the ground spike
use force.
Screw the open end of the ground spike
the ground spike
Point the product, so that the motion sensor
wards the area you wish to monitor. Make sure that the area
you wish to monitor is not blocked by objects, such as trees or
garden furniture.
(under the battery compartment
9
) are positioned correctly.
12
and ground spike connector
14
.
11
into soft earth. Never
14
into the holder for
14
is pointed to-
5
GB/IE/NI
15
15