Scomposizione Stelo - Portastelo E Rimozione Anelli Di Tenuta; Breaking Down The Fork Leg, Slider And Removing The Sealing Rings - Marzocchi SHIVER 35 Factory Works Mode D'emploi Et Entretien

Masquer les pouces Voir aussi pour SHIVER 35 Factory Works:
Table des Matières

Publicité

50
4.6 Scomposizione stelo - portastelo e
rimozione anelli di tenuta
ATTENZIONE
Questa operazione deve essere eseguita
solamente
dopo
completamente l'olio contenuto all'interno
del fodero.
• Rimuovere il raschiapolvere (25) dalla sede,
utilizzando un piccolo cacciavite a taglio.
• Con il medesimo cacciavite rimuovere l'anello
metallico di fermo (26).
IT
4.6 Breaking down the fork leg, slider
and removing the sealing rings
This operation must be done only after
having drained all of the oil out of the slider.
avere
scaricato
• Remove the dust seal (25) from its seat, using
a small flat-tip screwdriver.
• With the same screwdriver remove the metal
stop ring (26).
WARNING
EN
26
25

Publicité

Table des Matières
loading

Table des Matières