Honda UMR435T Manuel De L'utilisateur page 72

Engine
MODEL
Engine model
Engine description code
Engine type
Displacement
Bore and Stroke
Engine Net power
(in accordance with SAE J1349*)
Engine max. Net torque
(in accordance with SAE J1349*)
Idle speed
Speed at recommended max.
spindle speed
Maximum corresponding
spindle speed
Cooling system
Ignition system
Oil capacity
Fuel tank capacity
Spark plug
Carbon dioxide (CO2)
emissions**
*
The power rating of the engine indicated in this document is the net power
output tested on a production engine for the engine model and measured in
accordance with SAE J1349 at 7,000
(Engine Max. Net Torque). Mass production engines may vary from this value.
Actual power output for the engine installed in the final machine will vary
depending on numerous factors, including the operating speed of the engine
in application, environmental conditions, maintenance, and other variables.
** The CO2 measurement results from testing over a fixed test cycle under
laboratory conditions a(n) (parent) engine representative of the engine type
(engine family) and shall not imply or express any guarantee of the
performance of a particular engine.
NOTE:
Specifications may vary according to the types, and are subject to change without
notice.
UMR435T
GX35T
GCAMT
4-stroke, overhead cam, 1 cylinder
3
35.8 cm
39.0 × 30.0 mm (1.5 × 1.2 in)
1.0 kW (1.4 ps)/7,000 min
1.6 N·m (0.16 kgf·m, 1.2 lbf·ft)/5,500 min
3,100 ± 200 min
9,000 min
MIN. 10,000 min
Forced air
Transistor magneto
0.10 L (0.11 US qt, 0.09 lmp qt)
0.63 L (0.166 US gal, 0.139 lmp gal)
CMR5H (NGK)
Please refer to "CO2 Information List" on
www.honda-engines-eu.com/co2
-1
(Engine Net Power) and at 5,500
min
(2.18 cu-in)
-1
-1
-1
-1
-1
-1
min
69