Honda UMR435T Manuel De L'utilisateur page 61

4. After checking that the inner shaft is
free from a part where has become
fine or where is about to snap off,
measure the overall length of the
inner shaft and check that the
measurement is within 969 –
979 mm (38.1 – 38.5 in). If the
measurement is out of the
specification, replace the inner shaft
with a new one.
Consult with your authorized Honda
dealer for replacement. Overall
length of new inner shaft: 969 mm
(38.1 in)
5. Apply grease to the entire outer
surface of the inner shaft evenly from
end to end.
Insert the inner shaft into the
flexible shaft assembly to assemble
(see page 59).
6. While turning the inner shaft with
your hand, push it in and check that
the cutting blade or nylon-line
cutting head turns.
58
INNER SHAFT
OVERALL LENGTH
969 - 979
(38.1 - 38.5 in)