Honda UMR435T Manuel De L'utilisateur page 49

1. Engine oil change
CAUTION:
If the engine has been running, the engine, muffler and the engine oil are
very hot and they remain hot for a while after stopping the engine. To
protect you from burn, wait until they cool down before starting the oil
change.
NOTE:
Drain the oil while the engine is still warm to assure rapid and complete draining.
1. Check the fuel tank cap is tightened.
2. Remove the oil filler cap and drain the oil into the oil container by tipping the
engine toward the oil filler neck.
3. Refill with the recommended oil (see page 23) and check the oil level
(see page 22).
4. Install the oil filler cap.
ENGINE OIL CAPACITY: 0.10 L (0.11 US qt, 0.09 lmp qt)
Wash your hands with soap and water after handling used oil.
OIL FILLER NECK
UPPER LIMIT
46
FUEL TANK CAP
LOWER LIMIT
ENGINE OIL
FILLER CAP
OIL FILLER NECK
UPPER LIMIT