Honda UMR435T Manuel De L'utilisateur page 54

4. Grass deflector replacement
Install the grass deflector in the proper position securely to protect
you from the debris that are thrown from a wheeling cutting attachment.
CAUTION:
Wear heavy gloves to protect your hands, when working around the cutting
attachment.
Installation position of grass deflector
Nylon-line cutting head equipped:
Place the plate holes A and B pointing up. Then, put together the plate holes A
and B and the deflector holes 1, 2, 3 and 4, and fix them by using 5 × 20 mm
socket bolts.
Cutting blade equipped:
Place the plate holes C and D pointing up. Then, put together the plate holes A
and B and the deflector holes 3, 4, 5 and 6, and fix them by using 5 × 20 mm
socket bolts.
GRASS DEFLECTOR
PLATE
Tighten the bolts securely. Torque the bolts to:
5.2 N·m (0.53 kgf·m , 3.8 lbf·ft)
51