Pre-Operation Checks - Honda UMR435T Manuel De L'utilisateur

5. PRE-OPERATION CHECKS

For safe and efficient trimming, always make a pre-operation inspection before
operating:
Perform a pre-operation inspection on a firm, level surface with the engine
stopped and make sure that the engine switch is in the OFF position.
Before each use, look around and underneath the engine for signs of oil or
gasoline leaks.
1. Check the engine oil level
CAUTION:
Running the engine with low oil level will cause serious engine damage.
Check the engine oil level with the engine stopped and in a level position.
1. Remove the oil filler cap.
2. Check the oil level. If it is below the upper limit, fill with the recommended oil
(see page 23) to the upper limit.
3. Reinstall the oil filler cap securely.
Every 10 hours, check the engine oil level and replenish oil up to the top of the oil
filler neck if the engine is operated for more than 10 hours continuously.
OIL FILLER NECK
LOWER LIMIT
UPPER LIMIT
22
ENGINE OIL
FILLER CAP
UPPER LIMIT