Flexible Shaft - Honda UMR435T Manuel De L'utilisateur

8. Check the flexible shaft
• Check the outer surface of flexible
shaft for cut, cracks, shave,
discoloration, deformation and
other damage. The flexible shaft
must be replaced if it is damaged,
discolored or deformed.
Consult with your authorized Honda
dealer.
• Move the engine side flexible shaft
installation part back and forth and
check that the travel is 5 mm
(0.2 in)or below. The flexible shaft
must be serviced if the travel
exceeds 5 mm (0.2 in). Consult with
your authorized Honda dealer. (See
page 57 for flexible shaft inspection/
lubrication.)
9. Check all bolts and nuts
1. Check each bolt and nut for looseness. Tighten them securely if necessary.
2. Check the handle for loose mounting bolts or screws, and tighten them
securely if necessary.
LOOP HANDLE
HANDLE MOUNTING SCREWS (4)

FLEXIBLE SHAFT

ENGINE SIDE FLEXIBLE SHAFT
INSTALLATION PART
THROTTLE ASSEMBLY
33