Residual Risks - Ryobi RLT26CDY Manuel D'utilisation

EN
FR DE ES IT
and in good condition.
Maintain a firm grip on both handles while trimming.
Keep bump head below waist level. Never cut with
the bump head located over 76 cm or more above the
ground.
INSPECTION AFTER DROPPING OR OTHER IMPACTS
Thoroughly inspect the product and identify any affections
or damage with it. Any part that is damaged should be
properly repaired or replaced by an authorized service
centre.

RESIDUAL RISKS

Sogar wenn die Maschine wie vorgeschrieben benutzt
wird, ist es unmöglich ein gewisses Restrisiko vollständig
zu beseitigen. Die folgenden Gefahren können bei der
Benutzung entstehen, und der Benutzer sollte besonders
auf folgende Punkte achten:
Injury caused by vibration. Hold the tool by designated
handles and restrict working time and exposure.
Exposure to noise can cause hearing injury. Wear ear
protection and limit exposure.
SPECIFICATION
Weight
- Without fuel, cutting attachment
and harness
- Without fuel with bump head
Fuel tank volume
Cutting swath
Engine displacement
Line diameter
Maximum engine performance (in
accordance with ISO 8893)
Maximum rotational frequency of the
spindle
Engine speed (rotational frequency) at
recommended max. spindle rotational
frequency
Engine speed (rotational frequency)
at idle
Fuel consumption (in accordance with
ISO 8893) at max. engine performance
PT NL SV DA NO FI
English (Original instructions)
4.17 kg
4.38 kg
250 cm 3 or
(0.25L)
432 mm
26 cm / cc
3
2.4 mm
0.65 kW
12,000 min -1
12,000 min
-1
2,800-3,800
min -1
0.33 kg/h or
(0.45 L/h)
HU CS RU RO PL SL
SPECIFICATION
S p e c i f i c f u e l c o n s u m p t i o n ( i n
accordance with ISO 8893) at max.
engine performance
Vibration (in accordance with ISO 22867):
Front handle
- Idling
- Racing
- Equivalent vibration total value
Rear handle
- Idling
- Racing
- Equivalent vibration total value
Uncertainty K
Noise emission (in accordance with ISO 22868)
A-weighted emission sound pressure
level at the operator position
- Idling
- Racing
- Equivalent A-weight emission
sound pressure level
A-weighted sound power level
- Idling
- Racing
- Equivalent A-weight sound power
level
Uncertainty K
DESCRIPTION
Please refer to the figure sheet.
1. Primer Bulb
2. Choke Lever
3. Fuel Cap
4. Starter Grip
5. Throttle Lock
6. On / Off Switch
7. Throttle Trigger
8. Rear Handle
9. Front handle
10. Shaft
14
HR ET LT LV SK BG
508 g/kW.h
or (0.7 L/
kW.h)
3.5 m/s 2
18.5 m/s
2
13.3 m/s 2
6.4 m/s
2
16.3 m/s 2
12.4 m/s 2
1.5 m/s
2
76.4 dB (A)
100.1 dB (A)
97.1 dB (A)
86.8 dB (A)
110.7 dB (A)
110.7 dB (A)
2.5 dB