Accessories - Festool KA 65 Guide D'utilisation

CAUTION
Certain cleaning agents and solvents are harmful
to plastic parts.
Some of these include, but are not limited to:

Gasoline, Acetone, Methyl Ethyl Ketone (MEK),
Carbonyl Chloride, cleaning solutions containing
Chlorine, Ammonia, and household cleaners
containing Ammonia.
Always keep the machine clean. Read chapter

Purging of adhesive cartridges and After fin-
ishing work!
If the plastic sliding plate [2-1] (wear part) is

damaged, the plate can be replaced by loosen-
Use only original Festool accessories and Festool
consumable material intended for this machine.
These components are designed specifically for
this machine. Using accessories and consumable
material from other suppliers will most likely affect
the quality of your results and limit warranty
claims. Machine wear or your own personal work-
load may increase depending on the application.
Protect yourself and your machine, and preserve
your warranty claims by always using original Fes-
tool accessories and Festool consumable material!
The order numbers of the accessories and tools can
be found in the Festool catalogue or on the Internet
under "www.festoolusa.com".
Systainer
Many Festool products are shipped in a unique sys-
tem container, called "Systainer". This provides
protection and storage for the tool and accessories.
The Systainers are stackable and can be inter-
ing the 4 screws underneath the support base
[1-17].
Keep the ventilation slits on the electric power

tool clean and unobstructed to guarantee ade-
quate cooling.
Store in a cool location that is free of dust.

EKAT
4
5
3
2
1

Accessories

locked together. They also can be interlocked atop
Festool CT dust extractors.
To open the Systainer
Turn the T-loc [8-1] to this position.
To lock the Systainer
Turn the T-loc [8-1] to this position.
To connect two Systainers
Place one Systainer on the top of the other (Fig.
[8A]).
Turn the T-loc [8-1] to one of this posi-
tions (Fig. [8B]).
The Systainers are connected and locked.
 A new generation Systainer is connectable on
top of a previous generation Systainer by the
four latches of the previous Systainer.
Customer service and repair only
through manufacturer or service
workshops: Please find the nearest
address at: www.festoolusa.com/ser-
vice
Use only original Festool spare parts!
Order No. at: www.festoolusa.com/
service
17