Wilo Stratos Série Notice De Montage Et De Mise En Service page 43

LC display
4
5
6
The currently set control system blinks.
By turning the tuning button other control systems can
be selected. The new selected control system blinks.
Pressing the button stores the new control system and
switches to the next menu.
t
Menu point only appears if a Stratos IF module was inserted with
input 0...10V.
Switch input 0...10V on/off
Activate input 0...10V: "ON" and the "module motor symbol" appears
in the display
The setting can be altered by turning the tuning button.
Deactivate input 0...10V: "OFF" appears in the display and the "motor
symbol" disappears.
Setting stored.
If the input was switched on, the menu manager jumps to
menu point 7a .
Switch pump on/off.
Switch on pump, "ON" and the "module motor symbol" appear in the
display
The setting can be altered by turning the tuning button.
Switch off pump, "OFF" appears in the display and the "motor symbol"
disappears.
Setting stored.
ENGLISH
Setting
37