Télécharger Imprimer la page

Eurosystems M250 EVO Manuel D'instructions page 11

Masquer les pouces Voir aussi pour M250 EVO:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

If you choose "A" : adjust the angle of the jointed nozzle holder (Fig. P - Part. 30); rotating downwards
to get a more narrow concentrated spray or rotating forward to get a wider, less concentrated spray
action. Choose the nozzle more suitable: green = 0.6 l / min, purple = 1 l / min.
Turn on the tap (Fig. Q - Part. 31) and press the switch (Fig. R - Part. 32) in pos. "1" to turn the pump
on. Portarsi sulla zona da trattare per sciogliere il ghiaccio o diserbare. Press the switch (32) in pos. "0"
to turn off the pump. Turn off the tap (31).
(Fig. R-S) If you choose "B" unroll the rubber hose (33) to the required length (max. 10m), press the
switch (32) in pos. "1" to turn on the pump. At this point you can start to spray, holding the spear (34) and
by pressing the lever (35); a slight pressure will cause the emission of the sprayed liquid, while pressing
down you will get a more powerful jet. Water the garden, shrubs, flowers and so on with clean water
ONLY. Use the melt-the-ice liquid on stairs, balconies, etc.; plant health or for spraying trees, hedges,
shrubs, etc.; or herbicides to treat soils which are difficult to reach etc. At the end of the job release the
lever (35), turn off the pump, wind the hose back and put the hose pipe. Please always clean as per par.
13 "INSTRUCTIONS FOR USE".
IMPORTANT: If you decide to change the type of product to be sprayed it is absolutely necessary to
provide a careful and complete cleaning of the tank and of the sprinkler system.
We believe, however, not recommended water or use products for the care of the plants, after the use of
liquid herbicides. Since even in the presence of a thorough cleaning, the molecules of the product could
remain inside the spraying set.
DATA IDENTIFICATION PRODUCT USE:
The machine is provided with a label-holder,
where the user is obliged to indicate the name of the product in use; such label holder (Fig. T - Part. 36)
is on the tank (37).
HAND WASHING SYSTEM: The machine is equipped with an autonomous tank (37) of the capacity of
10 liters, which serves to rinse hands or other parts of the body that accidentally come into contact with
the product in use. To make the water to come out from the tank it is necessary to rotate clockwise 180°
the lever (Fig. U - Part. 38) on the tap (39). To stop the release of water it is necessary to carry out the
above operation in reverse. IMPORTANT! IN TANK (37) YOU ARE ALLOWED TO PUT WATER ONLY.
MAINTENANCE AND STORAGE of the BATTERIES:
Protect your contacts from dirt and build-up of moisture. To keep the batteries in good conditions they
must be charged , as described previously, at least once every 4 months. The batteries age, even during
storage. Protect the batteries from overheating and flames : risk of explosion.
ATTENTION: DO NOT SPRAY WITH WATER!
During the storage disconnect the battery from the motor unit, separating the connectors (Fig. A - Part.
1) of the respective cables. Since the self-discharge increases with temperature, it is recommended that
the storage batteries at a temperature between +10 ° C and + 30 ° C.
Before storing the battery separate from each electrical circuit and place preferably in a cool and dry
place.
DISPOSAL INSTRUCTIONS:
Equipment, accessories and packaging should be disposed of in an environmentally friendly facility.
The consumed batteries must be recycled according to Directive 91/157 / EEC. Do not dispose of the
consumed battery in household waste, fire or water. Do not open the battery and return it using the
appropriate collection facilities. Do not dispose of municipal solid waste, but collected separately.
The substances and electrical components contained in this product, when abandoned or used
improperly, might prove harmful to the environment. The symbol of the "rubbish bin" on wheels and
crossed with a black bar shown below the bin", indicates that this device has been placed on the market
after 8/13/05 and is subject to collection. Any violation will be prosecuted according to law.
TECHNICAL SPECIFICATIONS OF THE BATTERY
Voltage: 12 V - Capacity: 5 A (x 2 = 10 A) - Weight: 1.6 Kg
DIMENSIONS:
length. : 1488 mm - width : 710 mm - height : 1108 mm. Weight: 28 kg (empty) - 88
kg (full).
12
EN

Publicité

loading