Package Contents; Introduction; Parts; To Set Up - Beurer TL 50 Mode D'emploi

• Keep the power cord away from heated objects and flames.
• Protect the unit from strong impacts.
• Do not disconnect the power adapter from the electrical outlet by pulling on the cord.
• This product has no user-serviceable parts; return the product to customer service for any repair
or replacement.
• If you are taking medication such as pain relievers, anti-hypertensives or anti-depressants, con-
sult your doctor before using the daylight lamp.
• People with retinal diseases as well as diabetics need to be examined by an ophthalmologist
before using this daylight lamp.
• Do not use if you have an eye disease such as cataracts, glaucoma, diseases of the optic nerve
in general and inflammation of the vitreous humor.
• If you have health concerns of any kind, contact your doctor before using this product.
• Do not use the device in the presence of flammable anesthetic gas connections with air, oxygen
or nitrogen oxide.
• Connect the unit only to the mains voltage listed on the type plate.
• Do not use the device if it shows signs of damage or does not function properly. In these cases,
contact Customer Service.
• If the mains connection cable of this device is damaged, it must be disposed of. If it cannot be
removed, the device must be disposed of.
• Do not position the device so that it is difficult to unplug the power adapter.
• Disposal of the device shall be according to local regulations.
• Strangulation resulting from baby or child entanglement in power adapter output cables.
• You cannot repair the device. The device contains no parts that you can repair.
• Only operate the device with the power adapter provided.

2. Package contents

1 x Daylight lamp
1 x AC-Adapter
1 x Instruction manual
1 x Quick start guide

3. Introduction

Why use a daylight lamp?
Natural spectrum daylight may help to reduce the effects associated with Winter Blues, jet lag, shift work
and seasonal time changes and boost your sense of well-being.

4. Parts

1. Fluorescent Screen
2. Rear Panel
3. ON/OFF Button
4. AC Adapter Socket

5. To Set Up

Remove plastic wrapping and check the device for damage. If you notice any damage, contact customer
service.
1. Place the device on a flat, level, stable, hard surface so that it will be 5.9 - 13.8 in (between 15 cm and 35
cm) away from you during use.
2. To prevent product damage, only use the supplied AC Power Adapter.
3. Insert the round power adapter plug into the AC Adapter Socket on the rear of the Daylight Lamp Stand.
Connect the AC Power Adapter to a standard 110 VAC electrical outlet.
1
4
3
2
4