Abicor Binzel ABIMIG A Série Mode D'emploi page 20

EN Translation of the original operating instructions
© The manufacturer reserves the right, at any time and without prior notice, to make such changes
and amendments to these operating instructions as become necessary due to misprints, inaccuracies
or product enhancements. Such changes will, however, be incorporated into subsequent editions of
the operating instructions.
All brand names and trademarks that appear in these operating instructions are the property of their
respective owners/manufacturers.
Our latest product documents as well as all contact details for the ABICOR BINZEL national
subsidiaries and partners worldwide can be found on our website at www.binzel-abicor.com.
1 Identification
1.1 Marking
2 Safety
2.1 Designated use
2.2 Classification of the warnings
2.3 Emergency information
3 Product Description
3.1 Technical Data
4 Scope of delivery
5 Functional Description
6 Putting into operation
6.1 Setting up the torch neck
6.2 Mounting the torch neck liner
6.3 Mounting the liner
6.4 Mounting the cable assembly on the
machine side
6.5 Feeding in the wire
EN - 2
EN-3 7 Operation
EN-3
8 Putting out of operation
EN-3
EN-3 9 Maintenance and cleaning EN-11
EN-3 9.1 Torch neck
EN-4 9.2 Coaxial cable
9.3 Cleaning the wire guide
EN-4 9.3.1 Replacing the neck liner
EN-4 9.3.2 Shortening the spiral liner
EN-5 10 Disposal
EN-5
EN-6
EN-6
EN-7
EN-8
EN-8
EN-9
ALPHA FLUX
EN-9
EN-10
EN-12
EN-12
EN-12
EN-13
EN-13
EN-13
BAL.0153 • 2018-08-24