Publicité
Les langues disponibles
Les langues disponibles
SavE Data prograM
It has a data storage and load program for your convenience. This feature can store up to 5 battery data
by number that represent the individual specification of batteries you are using. They can be called back
for the process of charging or discharging without setting up the program again. To set up the parameter
value in the program, press Start/Enter key to make it blink then change the value with INC or DEC key.
PROGRAM SELECT
SAVE DATA
SAVE [01]
NiMH
14.4V
3000mAh
NiMH CHARGE
At*
CUR
LIMIT
5.0A
NiMH DISCHARGE
1.0A
11.0V
NiMH CYCLE
DCHG>CHG
3
Save . . .
LoaD Data prograM
PROGRAM SELECT
LOAD DATA
LOAD [01] NiMH
14.4V
3000mAh
Load...
varioUS inforMation DUring tHE procESS
You can inquire various information on LCD screen during charging or discharging process. When you press DEC
button the charger shows the establishment of user settings. And also you can monitor the voltage of individual
cell by pressing INC button when the individual connection cable is linked to the Lithium battery being processed.
The parameter value setting up in this screen dose not affect charge or
discharge process. They only represent the specification of the battery.
The following screens will automatically be displayed exactly matched with
the battery type you set up. The example shows the battery pack of NiMH,
12 cells and 3000mAh of capacity.
Set up the charge current for manual charge mode, or the current limit for
automatic charge mode. Each mode can be switched by pressing INC and
DEC button at the same time when the current field is blinking.
Setting up discharge current and final voltage.
Setting up the sequence of charge and discharge, and the cycling number.
Saving the data.
This program calls back the data that was stored at "Save Data" program.
To load the data, press Start/Enter key once to blink the data number field
and select the number using INC or DEC key then press Start/Enter key for
more than 3 seconds.
Select the data number to be called back.
The data matched with the number will be displayed at this time.
Loading the data.
13
Publicité
