Publicité
Les langues disponibles
Les langues disponibles
Exhaust Pipe Spark Plug Arrestor
Clean the carbon deposits from the spark arrestor periodically.
Blocked spark arrestor will decrease the engine power. After driving
through mud or water, inspect the spark arrestor and clean it if
necessary�
The exhaust system temperature is very high just after operation.
Touching the pipe may lead to serious injury� Make sure the
exhaust system is cooled, and then proceed with inspection and
cleaning�
Remove the cap nuts and washers ( 1 ) .
Remove spark arrestor ( 2 ) .
Use a steel brush to clean any carbon deposits from the steel
screen ( 3 ) of the spark arrestor.
Clean inside the spark arrestor with compressed air�
Inspect for damage or wear to the steel screen of the spark
arrestor. Replace with a new spark arrestor if damaged or worn.
Reinstall the spark arrestor, washers and cap nuts onto the muffler.
Torque: 7.4 ft-lb. ( 1 0 N•m ) �
MAINTENANCE PROCEDURES
WARNING
155
3
1
2
Publicité
