Binding Cables - Sharp LL-S242A-W Manuel D'installation

Caution
• When connecting cables, spread a soft cloth on a stable level surface such as a desk, and gently place the monitor on it with
the screen facing down.
Video cable and USB cable
Secure the video cable (HDMI or DisplayPort) and USB cable using the cable clamp.
1. Remove the cable clamp.
Cable clamp
Digitizer pen cable
Secure the digitizer pen cable using the supplied clamper and fixing screw.
1. Pass the digitizer pen cable through the ring of the clamper.
2. Attach the clamper using the fixing screw.

Binding Cables

2. Route the cables through the cable
restraint slot.
Fixing screw
3. Push the cable clamp down into
place.
Cable restraint
slot
Clamper
Digitizer pen cable
Cable clamp
5
E