Miele PRI 210 Mode D'emploi page 185

Fold the ironer waxing cloth.

Start the waxing programme (see "Starting the waxing programme" in "Waxing the

heater plate").
Feed in the ironer waxing cloth with the rubber-coated side facing the roller into the

ironer.
Feed the ironer waxing cloth multiple times into the ironer from the left or right side at the

necessary intervals across the entire working width of the ironer. If no damp patches can
be seen on the ironer waxing cloth after it has passed through the ironer, add additional
ironing wax.
On ironers with feed-in belts, ensure that no ironing wax comes into contact with the
belts.
Otherwise the feed belts may become too smooth and can no longer be driven properly.
Press and hold the  button for at least 3 seconds once waxing is complete.

Waxing mode is deactivated.
- After waxing, feed a cotton cloth through the ironer in order to remove wax residues.
- To maintain the smooth surface of the heater plate, it should be waxed after every work-
ing day.
Always carry out cleaning in the cleaning programme and waxing in the waxing pro-
gramme, as otherwise the ironer's maintenance interval will not be reset. The mainten-
ance interval is only reset once cleaning and waxing have been carried out for at least
40 seconds in the corresponding mode.
1 .
2 .
3 .
en - Cleaning and care
185