en - Use
Changing the
value of a temper-
ature selection
button
Speed of ironer
166
The selected temperature selection button will be highlighted with a
bar underneath and the heater plate heated / cooled to the appropri-
ate temperature.
Press the temperature selection button you want to change the
value for.
When keeping the button pressed, the bar will light up underneath it
and the current temperature value will appear in the display.
Press the or – button to set the temperature you want to save for
that button.
Then press and hold the temperature selection button highlighted
with a bar underneath until it flashes once.
The new temperature value is now saved for that temperature selec-
tion button.
PRI 210/214:
Symbol
Speed range
Low speed range
Medium speed range
High speed range
PRI 217:
Symbol
Speed range
Low speed range
Medium speed range
High speed range
Spin speed selection buttons
The roller speed can be set either via the spin speed selection but-
tons (//) or alternatively via the and – buttons.
m
/
min
1.5–2.2
2.3–3.2
3.3–4.0
m
/
min
1.5–2.4
2.5–3.4
3.5–4.5