Publicité
Les langues disponibles
Les langues disponibles
not all four wheels are on the ground
●
the grass discharge chute is exposed
●
and is not protected by the grass catcher
and grass discharge chute cover
hands and feet of all persons are not
●
clear of the cutting enclosure
Never operate the product if the on/off
■
switch on the handlebar does not properly
start and stop the product.
Never attempt to lock the on/off switches in
■
the on position; this is extremely dangerous.
Do not force the product. It will do the job
■
better and safer at the speed for which it
was designed.
Stop the blade when crossing gravel
■
surfaces.
Do not pull the product backwards unless
■
absolutely necessary. If you must back the
product away from a wall or obstruction,
first look down and behind to avoid tripping
or pulling the product over your feet.
Turn off the motor and allow the blade
■
to stop if the product has to be tilted for
transportation when crossing surfaces
other than grass, and when transporting
the product to and from the work area.
Never use the product with defective guards
■
or shields, or without safety devices, such
as deflectors or grass collectors, in place.
Do not tilt the pro
■
duct when turning on the motor or while the
■
motor is running. If absolutely necessary,
you may raise the front of the lawnmower
by no more than 5 cm to enable easier
starting. Press down on the handlebar to
achieve this. Always return the lawnmower
to its normal position with all wheels
on the ground before cutting. Tilting
the lawnmower exposes the blade and
increases the probability of objects being
thrown and accidental contact with the
blade.
Turn on the motor carefully according to
■
instructions and keep hands and feet away
from blades. Do not put hands or feet near
or under rotating parts.
Never pick up or carry the product while it
■
is running.
Turn off the product, and remove the
■
isolator key and the battery pack. Make
sure that all moving parts have come to a
complete stop:
whenever
leaving
●
unattended (including disposal of grass
clippings)
before clearing blockages or unclogging
●
discharge chute
before checking, cleaning, or working on
●
the product
before removing the grass catcher or
●
opening the grass discharge chute cover
after striking a foreign object; inspect the
●
product for damage and make repairs
as necessary before restarting and
operating the product
If the product starts to vibrate abnormally
●
(check immediately)
–
inspect for damage, particularly the
blades
–
replace or repair any damaged parts
–
check for and tighten any loose parts
Avoid holes, ruts, bumps, rocks, property
■
stakes, or other hidden objects. Uneven
terrain could cause a slip-and-fall accident.
Always ensure that the motor control cable
■
is never trapped, pinched or otherwise
damaged during assembly or when folding
the handle.
ADDITIONAL BATTERY SAFETY
WARNINGS
WARNING
To reduce the risk of fire, personal injury,
and product damage due to a short circuit,
never immerse your tool, battery pack or
charger in fluid or allow a fluid to flow inside
them. Corrosive or conductive fluids, such
as seawater, certain industrial chemicals,
and bleach or bleach-containing products,
etc., can cause a short circuit.
PRODUCT FEATURES
OVERLOAD AND OVERHEAT PROTECTION
The product has an overload protection
device. When overloading is detected, the
product will automatically turn off. If the
overload protector is actuated, the on/off lever
must be released. Squeeze the on/off lever to
restart the product.
EN
the
product
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR
English |
3
Publicité
