Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Basic Operations
Pairing with a BLUETOOTH Device
When connecting a BLUETOOTH device for the first
time, mutual registration (called "pairing") is
required. Pairing enables this unit and other devices
to recognize each other.
1
Press HOME, then touch [Settings]
[Bluetooth] [Bluetooth Connection] [ON]
[Pairing].
flashes while the unit is in pairing standby
mode.
2
Perform pairing on the BLUETOOTH device
so it detects this unit.
3
Select your model name shown on the
display of the BLUETOOTH device*.
When pairing is made,
* If passkey input is required on the BLUETOOTH device,
input [0000].
Connecting Rear View Camera
By connecting the optional rear view camera to the
CAMERA IN terminal, you can display the picture
from the rear view camera. For details, see
"Connection/Installation" (page 11).
To display the picture from the rear view
camera
Press HOME, then touch [Rear Camera].
Canceling the Demonstration
Mode
1
Press HOME, then touch [Settings].
2
Touch [General], then touch [Demo] to set to
[OFF].
3
To exit the setup menu, touch
twice.
stays lit.
(back)
Updating the Firmware
To update the firmware, visit the support site on the
back cover, then follow the online instructions.
Note
During the update, do not remove the USB device.
7
GB
Publicité
Table des Matières
