Publicité
Les langues disponibles
Les langues disponibles
Disconnect the plug from the power
c)
source and/or the battery pack from
the power tool before making any
adjustments, changing accessories, or
storing power tools. Such preventive safety
measures reduce the risk of starting the
power tool accidentally.
d)
Store idle power tools out of the reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands of
untrained users.
e)
Maintain power tools. Check for
misalignment or binding of moving
parts, breakage of parts and any other
condition that may affect the power
tool's operation. If damaged, have the
power tool repaired before use. Many
accidents are caused by poorly maintained
power tools.
Keep cutting tools sharp and clean.
f)
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are
easier to control.
g)
Use the power tool, accessories and
tool bits etc., in accordance with these
instructions taking into account the
working conditions and the work to
be performed. Use of the power tool for
operations different from those intended
could result in a hazardous situation.
5) BATTERY TOOL USE AND CARE
a)
Recharge only with the charger
specified by the manufacturer. A charger
that is suitable for one type of battery pack
may create a risk of fire when used with
another battery pack.
b)
Use power tools only with specifically
designated battery packs. Use of any
other battery packs may create a risk of
injury and fire.
When battery pack is not in use, keep it
c)
away from other metal objects like paper
clips, coins, keys, nails, screws or other
small metal objects that can make a
connection from one terminal to another.
Shorting the battery terminals together may
cause burns or a fire.
d)
Under abusive conditions, liquid may
be ejected from the battery; avoid
contact. If contact accidentally occurs,
flush with water. If liquid contacts eyes,
additionally seek medical help. Liquid
ejected from the battery may cause irritation
or burns.
All manuals and user guides at all-guides.com
6) SERVICE
Safety Instructions for Cordless
Nailers
• Always assume that the tool contains
• Do not point the tool towards yourself or
• Do not actuate the tool unless the tool
• Disconnect the tool from the power source
• Do not use this nailer for fastening
• Do not use the tool as a hammer.
• Always check local workplace regulations.
• Always wear safety glasses.
• Always wear ear protection.
• Only use fasteners of the type specified in the
• Do not use any stands for mounting the tool to
• Do not disassemble or block any parts of the
• Prior to each operation check that the safety
• Never actuate the fastener driving tool into free
• In the work area, carry the tool at the workplace
Have your power tool serviced by
a)
a qualified repair person using only
identical replacement parts. This will
ensure that the safety of the power tool is
maintained.
fasteners. Careless handling of the nailer can
result in unexpected firing of fasteners and
personal injury.
anyone nearby. Unexpected triggering will
discharge the fastener causing an injury.
is placed firmly against the workpiece. If
the tool is not in contact with the workpiece,
the fastener may be deflected away from your
target.
when the fastener jams in the tool. While
removing a jammed fastener, the nailer may be
accidentally activated if it is plugged in.
electrical cables. It is not designed for
electric cable installation and may damage the
insulation of electric cables thereby causing
electric shock or fire hazards.
For exemptions check your local national
workplace regulations.
manual.
a support.
fastener driving tool such as the contact trip.
and triggering mechanism is functioning
properly and that all nuts and bolts are tight.
space.
using only one handle, and never with the
trigger actuated.
english
47
Publicité
