Bosch MCM4000 Mode D'emploi page 12

en Contents
Congratulations on the purchase of
your new Bosch appliance. You can find
further information about our products
on our website.
Contents
Intended use . ............................................10
Safety instructions ....................................10
Overview...................................................12
Operation . .................................................12
Cleaning and servicing .............................14
Troubleshooting . .......................................15
Storage .....................................................15
Disposal . ...................................................15
Guarantee.................................................15
Recipes/Ingredients/Processing ...............16
Overview
Please fold out the illustrated pages.
X Fig. A
Base unit
1 Rotary switch
P = Stop
M = Instantaneous switching at
maximum speed, hold switch for
required blending duration.
Setting 1–2, drive speed:
1 = low speed – slow,
2 = high speed – fast.
2 Drive
3 Accessories drawer (Fig. B)
To open the drawer, push the button
on the underside of the appliance and
pull out the drawer. To pull the drawer
out completely, tilt slightly upwards and
pull out. When inserting the drawer, tilt
slightly upwards and then push in all the
way.
4 Cord store
Bowl with accessories
5 Bowl
6 Lid
a Pusher
b Pusher insert
7 Drive shaft
12
Tools
8 Tool holder
a Universal blade
b Whipping / beating disc
9 Carrier disc for disc inserts
a Slicing insert A, coarse
b Slicing insert B, fine
c Shredding insert C, coarse
d Shredding insert D, fine*
10 Citrus press*
11 Blender*
* Depending on the model
If the blender is not included in the scope
of supply, it can be ordered from customer
service (order no. 00677472).
Operation
Before operating the appliance and
accessories for the first time, clean
thoroughly; see "Cleaning and servicing".
Preparation
■ Place the base unit on a smooth, stable
and clean surface.
■ Pull cord out of the cord store to the
required length.
Important information
– Keep the accessories drawer closed
while working with the appliance.
– Only use the rotary switch to switch the
appliance on or off.
– Never switch the appliance off by
rotating the bowl, the blender or a tool.
– Take all accessory parts out of the
bowl before use. Only insert the parts
needed.
– Do not switch the appliance on unless
tools or accessories have been
completely attached.
Bowl with accessories/tools
W Risk of injury from the rotating tools!
While the appliance is operating, never
reach into the mixing bowl. Always use the
pusher for adding ingredients.
After switching off, the drive continues
running for a short time. Change tools only
when the drive is at a standstill.