Operation
A
B
Fig. 91: Fastening the seat belt
Fig. 92: Unfastening the seat belt
A
E
30763b0005.eps
Fig. 93: Longer/shorter seat belt adjustment
3-38
Seat belt C is for the operator's safety.
Fastening the seat belt:
Fasten the seat belt as follows before starting the machine:
• Hold belt on buckle latch A and run it slowly and steadily over the hips to buckle B
• Insert buckle latch A into buckle B until it engages audibly (pull test)
C
• Tighten the seat belt by pulling at its end
The seat belt must be tightly in place over the hips!
Unfastening the seat belt:
Unfasten seat belt C as follows:
• Hold the seat belt
C
• Press button D on buckle B
A
Latch A is released by spring pressure
• Unfastening the seat belt
D
B
Longer/shorter seat belt adjustment:
Lengthen the seat belt as follows:
• Hold buckle latch A at a right angle to the seat belt and pull the seat belt to the
required length
• To shorten the seat belt, just pull the free end E of the belt
OM 803 us – Edition 3.7 * * 803b330.fm