Télécharger Imprimer la page

Wacker Neuson 803 Notice D'utilisation page 87

Masquer les pouces Voir aussi pour 803:

Publicité

Les langues disponibles

Les langues disponibles

Raising the rollbar
Lowering the rollbar
Raising the rollbar
OM 803 us – Edition 3.7 * 803b330.fm
NOTICE
Replace the lock nuts every time they are loosened.
Stop the machine on firm, level and horizontal ground
Stop the engine
Raise the lock lever
Remove the starting key
Information!
In order to raise it, the rollbar must be held by one person on either side.
Remove the lock nuts and screws A on either side
Slowly and carefully raise the rollbar
Insert the screws again on either side and secure them with the lock nuts
NOTICE
Replace the lock nuts every time they are loosened.
Stop the machine on firm, level and horizontal ground
Stop the engine
Raise the lock lever
Remove the starting key
Information!
In order to lower it, the rollbar must be held by one person on either side.
Remove the split pins and pins B on either side
Slowly and carefully lower the rollbar toward C to the limit S.
Stop the machine on firm, level and horizontal ground
Stop the engine
Raise the lock lever
Remove the starting key
Information!
In order to raise it, the rollbar must be held by one person on either side.
Slowly and carefully raise the rollbar
Fit pins B again on either side and secure them with the split pins
Operation
3-33

Publicité

loading

Produits Connexes pour Wacker Neuson 803

Ce manuel est également adapté pour:

803 dual power