Dogtra ARC1200S FREE PLUS Manuel Du Propriétaire page 36

ARC1202S FREE PLUS - 2nd Dog
NICK
Nick
•D1
Button
•D1 •D2
•D2
On/Off Button
Press
CONSTANT
•D1
Constant
•D2
•D1
•D2
Button
On/Off Button
Press
PAGER
•D1
•D1
•D2
•D2
Pager
P
Button
On/Off Button
Press
BOOST
•D1
•D1
•D2
•D2
Boost
On/Off Button
B
Button
Press
66
Move the toggle
switch down for "D2."
Hold down the on/off
button and the Nick
button.
Move the toggle
switch down for "D2."
Hold down the on/
off button and the
Constant button.
Move the toggle
switch up for "D2."
Hold down the on/off
button and the gray
Pager button.
Move the toggle
switch up for "D2."
Hold down the on/off
button and the brown
boost button.
3. Once you see the rapidly blinking light, release the
buttons. The transmitter will continue to rapidly blink
until the next step is completed.
4. Hold down the HANDSFREE SQUARE button. Release
the button once the rapidly flashing light on the
transmitter and the HANDSFREE SQUARE both show a
solid light.
5. Release all buttons. The HANDSFREE SQUARE should
now be coded.
6. Up to 14 HANDSFREE SQUARES can be paired with
one transmitter and can have duplicate functions. For
example, 4 can be paired for Pager, 5 can be paired for
Nick, and another 5 can be paired for Constant.
Caution!
Only 14 HANDSFREE SQUARES can be paired. When a
15th HANDSFREE SQUARE is paired, the initial 14 that
were paired will reset and need to be paired again.
HANDSFREE SQUARE
Button
67