Dogtra ARC1200S FREE PLUS Manuel Du Propriétaire page 32

Boosted Constant
The Boosted Constant feature will apply up to 12 seconds
of continuous boosted stimulation at the preselected
boosted level.
Current level + Boost amount =
Boosted Constant output
Example
If you set the Boost amount at 10, the Boosted Constant
output will increase as shown below.
Current
Boost amount
displayed level
0
15
30
40
Attention!
To use the Boosted Constant button at your current
displayed level, simply set the Boost amount to zero.
58
Boosted
Constant output
10 10
10 25
10 40
10 50
Setting up Boosted Constant feature
Rheostat
Dial
LCD Screen
LED
Indicator
Light
Boosted
Constant
Rheostat
Dial
LCD Screen
Boosted
Constant
1. Set the stimulation level
to zero.
2. Hold the Boosted
Constant button for 5
seconds until the LED
light blinks; then release
it.
3. Turn the Rheostat Dial to
select the incremental
Boost amount as shown
on the LCD screen.
Note: Set the Boost level
to 0 to use the Constant
stimulation without Boost.
4. Tap the Boosted
Constant button to
save the setting.
Note: The saved setting
will remain even if the unit
is turned off. To reset the
setting, repeat the steps
above.
59