Atag CS4411T Manuel page 239

All manuals and user guides at all-guides.com
BEFORE YOU BEGIN
Setting the language and the clock
When the power is fi rst supplied to the oven, you must set the language and the time.
1 Turn the Multi-function Selector to
set the language. Press Next/Start to
confi rm.
3 Example: to set 1:30.
Turn the Multi-function Selector to set
the hour of the day.
5 Turn the Multi-function Selector to set
the minute of the time and press Next/
Start to fi nish setting the clock. '30' will
stop blinking.
Automatic shut off (clock)
If the knobs of the oven are not operated for more than 10 minutes, the display will turn off
automatically for energy saving reasons. By operating any key, the display is switched on again.
If desired, this function can be turned off (see page 14; 'Auto shutoff ').
EN 12
2 Now you have to set the right time.
The '12' will blink.
4 Press Next/Start to confi rm.
The '00' will blink.
6 The display shows the time of day.
The appliance is now ready to use.
If you want to change the time later
on, you can do this by pressing Menu
and choose 'Time' by turning the
Multi-function Selector and press
Next/Start. Then follow step 2-6 as
described on this page.