Publicité
Les langues disponibles
Les langues disponibles
Operating Instructions
VC-12/1000A
Capacitor Jump Starter
Item no: 2799626
1 Intended use
The product is a standalone vehicle battery jump starter. It uses a capacitor to capture and
store residual energy from a weakened 12V battery, then releases that stored energy to
crank start the engine. It cannot be used on a battery that has a voltage less than 6V.
This product does not contain a rechargeable battery so does not need to be charged.
If you use the product for purposes other than those described, the product may be dam-
aged.
Improper use can result in short circuits, fires, electric shocks or other hazards.
The product complies with the statutory national and European requirements.
For safety and approval purposes, you must not rebuild and/or modify the product.
Read the operating instructions carefully and store them in a safe place. Make this product
available to third parties only together with the operating instructions.
All company names and product names are trademarks of their respective owners. All rights
reserved.
2 Delivery contents
■
Product
3 Latest product information
Download the latest product information at
code shown. Follow the instructions on the website.
4 Description of symbols
The following symbols are on the product/appliance or are used in the text:
The symbol warns of hazards that can lead to personal injury.
This product must only be used in dry, enclosed indoor areas. It must not become
damp or wet.
Read the operating instructions carefully.
5 Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling, we assume no liability for any resulting personal injury or
damage to property. Such cases will invalidate the warranty/guarantee.
5.1 General
■
The product is not a toy. Keep it out of the reach of children and pets.
■
Do not leave packaging material lying around carelessly. This may become dangerous
playing material for children.
■
If you have questions which remain unanswered by this information product, contact our
technical support service or other technical personnel.
■
Maintenance, modifications and repairs must only be completed by a technician or an
authorised repair centre.
5.2 Handling
■
Handle the product carefully. Jolts, impacts or a fall even from a low height can damage
the product.
5.3 Operating environment
■
Do not place the product under any mechanical stress.
■
Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam
and solvents.
■
Protect the product from high humidity and moisture.
■
Protect the product from direct sunlight.
5.4 Operation
■
Consult an expert when in doubt about the operation, safety or connection of the
product.
■
If it is no longer possible to operate the product safely, take it out of operation and pro-
tect it from any accidental use. DO NOT attempt to repair the product yourself. Safe op-
eration can no longer be guaranteed if the product:
– is visibly damaged,
3
■
Operating instructions
www.conrad.com/downloads
or scan the QR
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stresses.
5.5 Electrical safety
■
Switch off the vehicle engine and electronics before connecting the product.
■
Clean the battery terminals to maintain proper contact and prevent short circuits.
■
Avoid electric shock! Do not operate the product with wet hands and check the battery
clamp and cable insulation is not damaged.
■
Remove metal jewelry (e.g., necklaces, rings) when working with batteries to reduce the
risk of short circuits, electric shocks, or burns.
5.6 Personal safety
■
Wear eye protection to prevent injuries from explosions or corrosive chemicals while
working with lead-acid batteries.
■
Risk of explosion! Never operate the product in areas where flammable fumes or gases
are present (e.g. petrol stations).
■
Risk of burns - Allow engine compartments to cool down as they can reach high temper-
atures.
■
Keep away from moving engine parts like belts, pulleys and fans.
■
Risk of entanglement and burns! Loose clothing and jewelry can get caught or entangled
in moving or hot parts.
■
Explosive / noxious gases may be produced / present during use. Always use the
product in a well-ventilated area.
■
Have someone nearby in case there is an emergency.
5.7 Lead-acid battery
■
Keep fresh water, soap and eyewash within reach.
– If battery acid contacts skin or clothes, wash immediately with soap and water.
– Avoid touching eyes. If acid enters eyes, flush with water for 10 minutes and seek
medical help immediately.
6 Product overview
6.1 Product
1
2
6.2 LCD status display
1
LOW HIGH
2
V
READY
PREPARING
5
7 Connection
7.1 Preparation for connection
Before connecting the cables to a battery:
■
Switch OFF all vehicle electrics (e.g. air conditioner, heater, radio, lights etc.).
■
Make sure the ignition key is in the "OFF" position. For push-to-start ignition, make sure
the vehicle is completely OFF.
■
Check the battery contact terminals are clean.
■
Prepare your vehicle for ignition (e.g. place gear in park and engage the emergency
brake).
7.2 Connecting the leads
Important:
Always connect test leads to terminals in the correct order.
1.
LCD screen
2.
Power button
3.
Leads
3
3
1.
Battery voltage
2.
Connected to battery
3.
Battery voltage out of range:
4
LOW: <6 V, HIGH: >13 V
4.
Ready for jump starting
5.
Capacitor charging status
Publicité
