Publicité
Les langues disponibles
Les langues disponibles
Device-specific information
6
Device-specific information
6.1
Location of the interface
Expansion slot COM 2 is provided for the PROFIBUS-DP interface.
If the multichannel measuring instrument is to be equipped with a PROFIBUS-DP
interface as standard, this must be stated in the order details.
If your device is not equipped with a PROFIBUS-DP interface (part no. 00581173), it can
be retrofitted.
n
Operating manual B 202580.0
n
Installation instructions B 202580.4 or B 202581.4
n
Type sheet T 202580 or T 202581
NOTICE!
The type designation on the nameplate of the device indicates which optional
interfaces have been installed at the factory. Information regarding this can be
found in the 'Identifying the device version' chapter in operating manual or
installation instructions (the installation instructions are included in the scope of
delivery of the device).
Available interfaces can also be added by the user. Information regarding this
can be found in the 'Retrofitting optional boards' chapter in the operating
manual or the installation instructions.
417102396 Rev. 2-08.2023
34
Publicité
