Ecolab Versatronic Profibus Instructions De Configuration page 63

Configuringa PROFIBUS-DP-System
4.3.4 Configuration of a GSD file
Fig. 8: Configuration of a GSD file
Fig. 9: Configuration of a GSD file
* The configuration of the GSD file is de- signed for installation on the
SIMATIC S7 (SIEMENS).
Should installation problems with other controls be encountered, delete all
Preset = 1 entries.
In this case, it is also necessary to set up the variables selected in the GSD generator in
the correct order in the PLC process image.
27 417102396 Rev. 2-08.2023