Ecolab Versatronic Profibus Instructions De Configuration page 65

4.4.2 GSD generator
1.
Start the GSD generator
(example: Start / Programs / Devices / PROFIBUS / GSD generator).
2.
Select the device.
Fig. 11: GSD generator
3.
Select the variable to be transmitted to the DP master in the left window and use the
arrow key
Fig. 12: GSD generator
4.
Save the GSD file in any folder.
Fig. 13: GSD generator
If SIMATIC S7 from SIEMENS is used for project design, the names in the
GSD file must not be longer than 8 characters.
or drag & drop to move it into the right window.
29
Configuringa PROFIBUS-DP-System
417102396 Rev. 2-08.2023