Gima MONITEUR SPOT-CHECK PC-300 Manuel De L'utilisateur page 56

Instruction to User
Dear Customers,
Thank you for purchasing this quality product. Please read the following information very
carefully before using this device.
Read these instructions carefully before using this Spot-Check Monitor. These instructions
describe the operating procedures to be followed strictly. Failure to follow these instructions
can cause monitoring abnormity, equipment damage and personal injury. The manufacturer
is NOT responsible for the safety, reliability and performance issues and any monitoring
abnormality, personal injury and equipment damage due to user's negligence of the operation
instructions. The manufacturer's warranty service does not cover such faults.
Warnings:
 Do NOT use the device under the flammable gas condition or in any environment that may
lead to explosion.
 The device and accessories that shall not be serviced or maintained while the device
is in use.
 The doctor or patient is an intended operator.
 Do not modify this equipment without authorization of the manufacturer.
 The SpO , NIBP, Temperature, ECG(optional) measurements are frequently used functions.
2
 The device is IP22 with protection harmful solid objects and ingress of liquid. So that
means the device is protected against solid foreign objects of 12.5mm and greater,
and protected against vertically falling water drops when enclosure tilted up to 15°.
 Please check the monitor completely to verify that the accessories can function safely
and normally.
ENGLISH
56