Electrical Pre-Equipment; Safety Instructions Relating To Installation - SOMFY CONTROL BOX 3S io Manuel D'installation

Control Box 3S io

Electrical pre-equipment

The installation of the power supply must comply with the standards in force in the country in which the motorisation is
installed, and must be carried out by qualified personnel.
The electric line must be exclusively reserved for the motorisation and equipped with protection, comprising:
- a 10 A fuse or breaker,
- a differential type device (30 mA).
An all-pole supply cut-off device must be provided.
It is recommended that you fit a lightning conductor (maximum residual voltage 2 kV).
> cable feed
Underground cables must be equipped with a protective sheath with a sufficient diameter to contain the motor cable and
the accessories cables.
For overground cables, use a cable grommet that will withstand the weight of vehicles (ref. 2400484).

Safety instructions relating to installation

Do not connect the motorisation to a power supply (mains, battery or solar) before installation is complete.
Modifying one of the elements provided in this kit or using an additional element not recommended in this manual is strictly
prohibited.
Monitor the gate as it moves and keep people away from it until installation is complete.
Do not use adhesive to secure the motorisation.
Install any fixed control device at a height of at least 1.5 m and within sight of the gate, but away from moving parts.
After installation, ensure that:
- the mechanism is correctly adjusted
- the manual back release device is operating correctly
- the motorisation changes direction when the gate encounters an object 50 mm high positioned halfway up the leaf.
> Safety devices
For operation in automatic mode or remote control, photoelectric cells must be installed.
For operation in automatic mode, or if the gate faces a public road, an orange light type signalling device may be
required to comply with the regulations in the country in which the motorisation is installed.
> clothing precautions
Take off any jewellery (bracelet, chain, etc.) during installation.
For manoeuvring, drilling and welding operations, wear appropriate protection (special glasses, gloves, ear protection,
etc.).
Regulations
SOMFY declares that this product complies with the essential requirements of applicable European directives. A declaration
of conformity is available at www.somfy.com/ce (CONTROL BOX 3S AXOVIA io/CONTROL BOX 3S IXENGO io).
Assistance
You may encounter difficulties or have questions when installing your motorisation.
Do not hesitate to contact us; our specialists are on hand to answer all your questions. Internet: www.somfy.com
3
DANGER
DANGER
WARNING
ATTENTIoN
WARNING
Copyright © 2015 Somfy SAS. All rights reserved