Display - Kenwood TK-5720 Mode D'emploi

l
key
Press to activate its programmable function {page 6}.
m key
Press to activate its programmable function {page 6}.
n
Speaker
Internal speaker
o
PTT (Push-to-Talk) switch
Press and hold this switch then, speak into the microphone to call a station.

DISPLAY

Indicator
Monitor or Squelch Off is activated.
Blinks when an incoming call matches your Optional
Signaling.
The current zone (left icon) or channel (right icon) is added to
scan.
Scan is in progress. Blinks while scan is paused.
A message is stored in memory. Blinks when a new
message has arrived.
The current channel is a Priority channel.
Operator Selectable Tone (OST) is activated.
Talk Around is activated.
Signal Strength indicator {page 20}
Encryption is activated.
Auto Recording on the VGS-1 option is activated.
Auto Reply Message on the VGS-1 option is activated.
The auxiliary A function is activated.
The auxiliary B function is activated.
Lone Worker is activated.
Description
5