Menu Mode; Menu Access; Menu Configuration - Kenwood TK-5720 Mode D'emploi

Many functions on this transceiver are selected or confi gured through the Menu
instead of physical controls. Once you become familiar with the Menu system,
you will appreciate the versatility it offers.

MENU ACCESS

1 Press the key programmed as Menu.
• The category list is shown.
• When there is only 1 category, the function list is shown (proceed to step 4).
2 Press / to select a category item.
• If you are using a microphone keypad, you can enter a category number directly.
3 Press or
4 Press / to select a function item.
• If you are using a microphone keypad, you can enter a function number directly.
5 Press or
• Press or # to return to the category list.
6 Press / to select your desired setting.
• For settings with more than 1 level, repeat steps 5 and 6.
7 Press or
• Press or # at any time to return to the previous display.
• Press at any time to exit Menu mode.

MENU CONFIGURATION

Some transceiver keys may already be programmed with functions listed in the
Menu. Those functions can be accessed directly by pressing the key. All other
functions can still be accessed using the transceiver Menu. The following table
lists the available Menu items.
Display
2-TONE
AUTO REPLY MSG
AUTO DIAL
AUTO DIAL PROG
AUX A
AUX B
CLOCK
CLOCK ADJUST

MENU MODE

to view the function list.
to set up the selected function item.
to set the selected setting and exit Menu mode.
2-tone Mode
Auto Reply Message ON/OFF
Autodial Mode
Autodial Programming Mode
AUX A ON/OFF
AUX B ON/OFF
Clock ON/OFF
Clock Adjustment mode
Description
9