Display Information - Kenwood LZ-702W Mode D'emploi

Switching Screen Mode
Press the [MODE] button.
Each time the button is pressed, the screen
mode switches as follows:
Display
"Full"
"Just"
"Cinema"
"Zoom"
"Normal"
• You cannot operate when the navigation picture is
displayed.

Display information

When you press the [V.SEL] button, the status of
the monitor is displayed.
1
2
3
Screen mode Display
1
Volume Display
2
Speaker mode Display
3
Video source Display
4
Setting
Full picture mode
Justify picture mode
Cinema picture mode
Zoom picture mode
Normal picture mode
4
5
AV output Display
5
• When <Setting the Rear view camera> (page 8) is
set to "Mirror" and the display is showing rear view
camera pictures, display information is not displayed.
• The information display is cleared automatically after
approximately 5 seconds.
Setting the Speaker Mode
You can select the built-in speaker mode you
wish.
Press the [MODE] button for at least 1 second.
Each time the button is pressed for at least 1
second, the built-in speaker mode switches as
follows:
Display Setting
"Normal" Sound with monitor picture.
"NAV" Sound of navigation.
"Video1" Sound of video 1.
"Video2"/ Sound of video 2.
"R-Cam"
"Off" Built-in speaker is turned off.
Setting the AV Output
Selects an AV source to be output at the "AV
OUTPUT" terminals.
Press the [MENU] button for at least 1 second.
Each time the button is pressed for at least 1
second, the AV output switches as follows:
Display Setting
"Video1"/ Select the AV IN1 source.
"NAV"
"Video2"/ Select the AV IN2 source.
"R-Cam"
"Off" No output to the "AV OUTPUT" terminals.
5
|
English