Kenwood LZ-702W Mode D'emploi page 4

Operations
Power
Turning ON the Power
Press the [SCRN] button.
Turning OFF the Power
Press the [SCRN] button for at least 1 second.
Video Source Selection
Press the [V.SEL] button.
Each time the button is pressed, the video source
switches as follows:
Display Setting
"Video 1" Video 1 ("NAV" setting during "RGB" or "Off")
"Video 2"/ Video 2 ("AV-IN2" setting during "Video 2" or "R-
"R-Cam" Cam")
"NAV" Navigation ("NAV" setting during "RGB" or "AV-IN1")
• For "NAV" and "AV-IN2" setting, refer to <Setting the
NAV input> (page 8) or <Setting the AV-IN2 input>
(page 8).
• You cannot view video pictures whilst the vehicle is
moving. To enjoy video pictures, find a safe place to
park and engage the parking brake.
4
|
English
PWR V.OFF SP AV OUT VOLUME
OFF MODE
SCRN V.SEL MODE MENU
∞ 5
V.SEL MENU
SCRN MODE
LZ-702W
WIDE LCD TOUCH SCREEN MONITOR
Auto Dimmer sensor
Volume
Increasing Volume:
Press the [5] button.
Decreasing Volume:
Press the [∞] button.
• You can not control this function when <Setting the
Speaker Mode> (page 5) is set to "Off".
Swithing the Display off mode
You can set the display off mode for the monitor.
Press the [V.SEL] button for at least 1 second.
Exit the Display off mode
Press any button.
Press the button other than the [5] and [∞]
buttons.