Publicité
Les langues disponibles
Les langues disponibles
EnGLIsh
Battery Type
The DCG418 operates on a 54V battery pack.
These battery packs may be used: DCB546, DCB547, DCB548,
DCB549. Refer to Technical Data for more information.
Package Contents
The package contains:
1 Angle grinder
1 125 mm Guard (Type 27)
1 Side handle
1 Flange set
1 Hex wrench
1 Li-Ion battery pack (C1, D1, E1, L1, M1, P1, S1, T1, X1, Y1, Z1
models)
2 Li-Ion battery packs (C2, D2, E2, L2, M2, P2, S2, T2, X2, Y2, Z2
models)
3 Li-Ion battery packs (C3, D3, E3, L3, M3, P3, S3, T3, X3, Y3, Z3
models)
1 Instruction manual
•
Check for damage to the tool, parts or accessories which may
have occurred during transport.
•
Take the time to thoroughly read and understand this manual
prior to operation.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
Date Code Position (Fig. A)
21
The date code
, which also includes the year of manufacture,
is printed into the housing.
Example:
2021 XX XX
Year of Manufacture
Description (Fig. A, D, F)
WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
1
Trigger switch
2
Lock-off lever
3
Spindle lock button
4
Spindle
5
Side handle
6
Abrasive wheel (Fig. F)
7
Backing flange
8
Threaded clamp nut
9
Guard
48
10
Guard release lever
11
Battery pack
12
Battery release button
13
Fuel gauge button
14
Screw
15
Lugs
16
Gear case slots
Intended Use
The DCG418 cordless angle grinder has been designed
for professional cutting, grinding, sanding and wire
brush applications.
DO nOT use under wet conditions or in the presence of
flammable liquids or gases.
This cordless angle grinder is a professional power tool.
DO nOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
Young children and the infirm. This appliance is not
•
intended for use by young children or infirm persons
without supervision.
•
This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with this product.
Electronic Clutch
The electronic torque limiting clutch reduces the maximum
torque reaction transmitted to the operator in case of jamming
of a disc. This feature also prevents the gearing and electric
motor from stalling. The torque limiting clutch has been factory-
set and cannot be adjusted.
Brake
Once the power is shut off, the brake stops the wheel spinning
more quickly than a unit without this feature. This improves
efficiency and increases user protection. Stopping time will vary
depending upon the type of wheel used.
ASSEMBLY AND ADJUSTMENTS
WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect battery pack
before making any adjustments or removing/
installing attachments or accessories. An accidental
start-up can cause injury.
WARNING: Use only D
Attaching Side Handle (Fig. C)
WARNING: Before using the tool, check that the handle is
tightened securely.
WARNING: The side handle should always be used to
maintain control of the tool at all times.
5
Screw the side handle
tightly into one of the holes on either
side of the gear case.
WALT battery packs and chargers.
e
Publicité
