Adventys Induc-NoLimit Multizones KNL4 Guide D'utilisation Et D'installation page 39

Les langues disponibles

Switch off tn cooking zone:

Press the SELECTION key for 3 seconds for the zone you

want to turn off.

Specific meaatge diaplity

The device is perfectly secure. It constantly monitors temperature values and several other electrical pa-

rameters to guarantee the user the highest level of performance and safety at all times.

If during use an incorrect operating status is detected, there may be forced shutdown of the device with

the indication on the power level display, a flashing error code "Fx" or " hx ".

The different codea mtntged by the device tre liiated in the ttblie beliow.

T ° vitro aenaor miaaing or ahort-circuited

Eliectronic T ° aenaor miaaing or ahort-circuited

Three-phtae mtina volittge out of toliertnce

Low volittge auppliy volittge out of toliertnce

Room tempertture aenaor (interntli to the product) miaaing or ahort-circuited

Error on controli eliectronica of power trtnaiatora

Probliem connecting ftna (litck of ftn or reverae politrity)

Overhetting vitro

Overhetting of eliectronic power circuita

Probliem on tempertture aenaor under the vitro

Overhetting of the tmbient tempertture

The flashing error code is displayed as long as the user has not stopped the unit himself and has not re-

started a new start, by using the SELECTION / ON key of the relevant fireplace.

If an error code remains permanently displayed despite several successive acknowledgment attempts,

contact the service department.

If error code F8 is displayed when the generator block is turned on, it indicates a problem with the fans.

Either there is no connection (absence) of 1 or more fans, or there is reverse polarity, or there is overcon-

sumption. You should contact the after-sales service and report error F8.

Pending the verdict of the manufacturer, the user has the opportunity to inhibit the error F8 and use the

product in a degraded mode, until the complete correction of the problem.

ERROR DESIGNATION

Switch off the 4 zonea aimulittneoualiy:

Press for 3 seconds the GLOBAL selection key of the

4 zones.

CODE ON DISPLAY

H1 or H3