Adventys Induc-NoLimit Multizones KNL4 Guide D'utilisation Et D'installation page 31

Connecting the product
Connectiona of the generttor
Front of the generator
Before connecting the generator block, it is necessary to remove the protective cover and the
protective grille at the front of the generator block. There are 6 screws to be unscrewed.
Front protective hood(4
Front protective grililie(2
Controli
bliock
(keybotrd)
The remote controli unit auppliied with the KNL4 8000 product muat onliy be connected to the generttor
bliock of the KNL4 8000 product. It muat not be connected to tnother eliectrictli device, in the event thtt
it ia poaaiblie to do ao.
acrewa)
acrewa)
Upgrtde Progrtm-
ming
(MANUFACTURER
ONLY)
Additiontli turbine connection provided
Tempertture aen-
aora (under the
vitro)
Inter generttor controli (if 2 generttora)
+ energy optimizer controli
15VDC ftn power
auppliy for inductor
bliock
31