Adventys Induc-NoLimit Multizones KNL4 Guide D'utilisation Et D'installation page 35

Connecting the product
Connectiona of the generttor
CONNECTION TECHNIQUE
To be able to insert and connect each conductor in the terminal block:
1 /
Insert upwards the end of a flat screwdriver.
The maximum diameter of the rod must be 4mm.
1
Repeat the previous steps for each wire to be connected
Be careful not to push the wire end too far into the jaw of the terminal block!!!
2 /
Then lift the screwdriver to allow the lowering of
the spring-loaded jaw of the terminal block contact.
!
2
NO
YES
35