Husqvarna 967 96 64-06 Manuel D'utilisation page 24

Technical data
Motor power, kW/hp
Rated current, A
Rated voltage, V
Phases
Frequency, Hz
Weight, kg/lbs
Grinding width, mm/in.
Grinding disc, mm/in.
Grinding pressure, kg/lbs
Grinding pressure with support wheel, kg/lbs
Weight in position 1 (forward), kg/Ibs
Weight in position 1 (forward) with support wheel, kg/Ibs
Weight in position 2 (vertical), kg/Ibs
Weight in position 2 (vertical) with support wheel, kg/Ibs
Weight in position 3 (rearward), kg/Ibs
Weight in position 3 (rearward) with support wheel, kg/Ibs
Grinding disc speed, min/max rpm
Griding head speed, min/max rpm
Direction of rotation (from above)
Max. gradient, degrees °
Enclosure, IP
Recommended dust extractor
Dust extractor attachment, mm/in.
3
Min. Air flow, m /h /CFM
Min. Vacuum, kPa/psi
1
Technical data for dust extractors are not conclusively describing actual performance over time between dif-
ferent dust extractors. For Husqvarna products OSHA objective data are available at
www.husqvarnacp.com/us.
24
Technical data
1
11/15
30
380-415
3-phase
50-60
497/1096
800/31.5
3X270/10.5
79/175
85/187
298/656
315/693
249/548
266/585
195/429
212/466
421-1403
28-92
Grinding head: clockwise
Grinding disc: counterclockwise
10
54
76/3
815/480
30/4.4
1253 - 002 - 24.10.2019