Husqvarna 967 96 64-06 Manuel D'utilisation page 20

7. Connect the motor cable to the electrical outlet (F)
on the electrical enclosure.
F
Problem
The product does not
start.
20
G
Troubleshooting
Cause
The extension cable is disconnected or dam-
aged.
An emergency stop button is engaged.
The safety switch is open in the electrical en-
closure.
8. Lock the motor cable to the electrical outlet (G) on
the electrical enclosure.
9. Remove the grinding head in opposite sequence.
Solution
Connect the extension cable or if it is neces-
sary, replace the extension cable.
Turn the emergency stop button on the con-
trol panel clockwise to disengage.
Close the safety switch to complete the cir-
cuit.
1253 - 002 - 24.10.2019