Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
Installation: P85 power amplifer
TRIG
OUT
VOLTAGE
SELECT
REMOTE
IN
POWER INLET
Connecting to power, loudspeakers and
other equipment
Follow the installation instructions for the integrated amplifi er
on pages 4–6.
– Connect this input to the output sockets of your pre-
AUDIO IN
amplifi er or the
MONO LINK
– The power amplifi er can be adapted to provide
two mono loudspeaker outputs from a single input. Pull out the
link supplied and use it to connect the
sockets together. Using one power amplifi er per loudspeaker
will enable you to bi-amplify bi-wireable loudspeakers.
This is particularly benefi cial for top quality stereo installations
with a separate pre-amplifi er, or where amplifi ers are provided
for the left, centre and right channel loudspeakers in a fi ve
speaker Dolby Pro Logic or Dolby Digital system.
Contact your Arcam dealer for more information.
"Daisy chaining" – The power amplifi er can be connected to
further power amplifi ers to drive more speakers (e.g. those in
other rooms or tri-amplifi ed speakers, etc).
Connect the extra power amplifi er inputs to the
sockets on the power amplifi er, left to left, right to right.
A85/P85
10
A85/P85 multi.id
10
+
–
+
–
R/CH1
L/CH2
SP2
AUDIO
4 – 16 OHMS
L
SP1
R
+
–
+
–
R/CH1
L/CH2
IN
OUT
sockets of an integrated amplifi er.
PRE OUT
and
L
R AUDIO OUT
AUDIO OUT
+
–
CTR/CH3
SP2
CTR/CH3
LINK
4 – 16 OHMS
SP1
+
–
CTR/CH3
Optional Third Channel Module
– provides a third 85W channel
suitable for Home Cinema or
multi-channel audio use.
Remote switching
By making a connection from the
socket of the P85
REMOTE IN
power amplifi er to the
socket of the A85 integrated
TRIG OUT
amplifi er, you can use the A85 to switch the power amplifi er on
and off. If confi gured in this way, the front panel
POWER
of the A85 (or the
button on the remote control)
Power/Standby
switches both amplifi ers on and off together. This facility allows
you to conceal the power amplifi er yet still control it.
The connecting cable required is a 3.5mm to 3.5mm jack lead
(stereo or mono) and it is possible to connect several power
amplifi ers to an A85 by 'daisy chaining' from
TRIG OUT
P85 into the
of the next.
REMOTE IN
Three channel option
The power amplifi er can be upgraded from stereo to three
channels by adding a Third Channel Module: in this case, the
model is designated P85/3.
The module offers extra loudspeaker terminals together with
a third set of
and
phono sockets and converts
AUDIO IN
OUT
the P85 into a 3 x 85W (RMS per channel into 8Ω) amplifi er
suitable for Home Cinema or multi-channel audio use.
Contact your Arcam dealer for further details.
03/29/01, 3:43 PM
AUDIO
IN
OUT
button
of one
Publicité
