2. Remove the rear locknut (B) to give access to
the adjustment nut.
3. Put a 5 kg (10 lbs) weight (C) on top of the
continuous track, in the center between the 2
wheels.
4. Turn the adjustment nut (B) until the distance (D)
between the continuous track and the steel plate
is between 3.175 and 6.350 mm (0.125 and
0.250 in). wide.
876 - 011 - 11.05.2020
B
A
5. Attach the locking screw (A) and then the rear
locknut (B).
To clean the product
•
Clean plastic parts with a clean and dry cloth.
•
Do not use a high pressure washer to clean the
product.
•
Do not flush water directly on the motor.
•
Use a brush to remove leaves, grass and dirt.
D
C
25