Bosch NETP069SUC Manuel D'utilisation page 15

5.8 Kitchen timer
You can use the Kitchen timer to set a time of up to
99 minutes.
The Kitchen timer is independent from other settings and
does not switch off a cooking zone.
You can also use the Kitchen timer when the cooktop is
turned off or the panel lock is activated.
Setting the Kitchen timer
WARNING
Boilovers can cause smoke and some foods and oils may
catch fire if left on high temperature settings.
When using a timer, always supervise the cooktop.
▶
Do not allow anything to boil over or burn.
▶
Press kitchen timer.
1.
lights up in the timer display.
a
a The indicator above kitchen timer lights up.
Set the desired time in the settings area.
2.
Press kitchen timer to confirm.
3.
a The time starts to count down after a few seconds.
a When the time has elapsed, a beep sounds.
the timer display.
a The indicator above kitchen timer blinks.
Press any key to turn off the signals. After 10 seconds
4.
the signals stop automatically.
Changing or canceling the kitchen timer
Press kitchen timer.
1.
Set the desired time in the settings area.
2.
To cancel the kitchen timer, set the time to ⁠ ⁠ .
Press kitchen timer to confirm.
3.
5.9 Count-up timer
The Count-up timer displays the time that has elapsed
since activating the function.
The Count-up timer works independently from the cooking
zones and from other settings. This function does not au-
tomatically switch off a cooking zone.
Starting the Count-up timer
WARNING
Boilovers can cause smoke and some foods and oils may
catch fire if left on high temperature settings.
When using a timer, always supervise the cooktop.
▶
Do not allow anything to boil over or burn.
▶
Press count up timer.
▶
lights up on the timer display.
a
a The indicator above count up timer lights up.
a The timer starts to count up.
Canceling the Count-up timer
Press count up timer.
1.
a The timer stops running.
Press count up timer again.
2.
a The timer is cleared and turns off.
5.10 Panel lock
You can use the panel lock to prevent the cooktop from
being turned on accidentally.
CAUTION
The panel lock may be turned on and off accidentally due
to:
water spilled during cleaning
▶
food that has overflowed
▶
objects being placed on the panel lock touch key.
▶
Activating the panel lock
Requirement: The cooktop is turned off.
Touch panel lock for 4 seconds.
▶
a lights up for 10 seconds.
a The control panel is locked.
Deactivating the panel lock
Touch panel lock for 4 seconds.
▶
a The control panel is unlocked.
blinks in
Automatic panel lock
This function automatically activates the panel lock when
you switch off the cooktop.
The automatic panel lock can be activated in the basic set-
tings → Page 15 .
5.11 Wipe protection
With this function you can avoid changing the settings
while cleaning the control panel during cooking.
This function does not lock the main switch. You can turn
the cooktop off at any time.
Activating wipe protection
Touch panel lock.
▶
lights up.
a
a The control panel is locked for 35 seconds.
a After 30 seconds a beep indicates that the wipe protec-
tion is about to turn off.
Deactivating wipe protection
You can turn off the wipe protection manually.
Touch panel lock.
▶
goes out.
a
5.12 Basic settings
You can configure the basic settings for your appliance to
meet your needs.
Basic settings overview
Here you can find an overview of the basic settings and
the preset factory settings.
Display
1 Factory setting
Function
Panel lock
1
– Manual
– Automatic
– Function deactivated
Operation en-us
15