Publicité
Les langues disponibles
Les langues disponibles
en-us Operation
Symbol Cooking zone
Single cooking zone
Dual cooking zone
Notes
¡ The cooking zone regulates the temperature by
switching the heat on and off. The heat may also switch
on and off when on the highest power level.
– This protects components from overheating.
– The appliance is protected from electrical overload.
– Better cooking results are achieved.
¡ For cooking zones with more than one heating element,
the different sections of the cooking zone may turn on
and off at different intervals.
Operation
5 Operation
Here you will find everything you need to know about op-
Operation
erating your appliance.
5.1 Turning the cooktop on
Press
.
▶
a The indicator above
a The symbols for the cooking zones and functions avail-
able at this time light up.
a . lights up in the cooking zone displays.
5.2 Turning the cooktop off
Press and hold
until all indicators go out.
▶
a All cooking zones are turned off.
a The residual heat indicators remain lit until the cooking
zones have cooled off sufficiently.
Note: The cooktop turns off automatically when all the
cooking zones have been turned off for more than 20 sec-
onds.
5.3 Cooking zone settings
In order to make settings on a cooking zone, the cooking
zone has to be selected.
Set the desired power level for each cooking zone in the
settings area.
Setting
Power level
lowest power level
highest power level
Intermediate setting for all power levels
Setting the power level
Requirement: The cooktop is turned on.
Press
to select the cooking zone
1.
a . lights up brighter on the cooking zone display.
10
turns on.
.
Function
Only one cooking zone size is available.
Two cooking zone sizes are available.
→ "Using the dual cooking zone", Page 10
Set the power level in the settings area
2.
1
Press to set an intermediate level.
Changing the power level
Press
to select the cooking zone.
1.
Set the power level in the settings area.
2.
Turning the cooking zone off
Press
to select the cooking zone.
1.
Select
in the settings area.
2.
a The residual heat indicator lights up after approximately
10 seconds.
Note: You can also switch off the cooking zone directly by
touching the cooking zone symbol for longer than 3 sec-
onds.
Using the dual cooking zone
Requirement: The cooking zone is turned off.
Press
to select the cooking zone.
1.
a . lights up brighter in the cooking zone display.
Press additional heating once.
2.
lights up.
a
a Both rings of the dual cooking zone are selected.
Press additional heating again.
3.
turns off.
a
a The inner ring of the dual cooking zone remains se-
lected.
5.4 Recommended cooking settings
Here you can find recommendations on cooking and an
overview of various dishes with suitable heat levels.
¡ Select power level 8 or 9 for bringing to a boil or initial
frying.
¡ Stir thick liquids occasionally.
¡ Food that needs to be seared quickly, or food which
loses a lot of liquid during initial frying, is best seared in
several small portions.
.
2
Publicité
