WAGNER W 560 Traduction Du Mode D'emploi Original page 25

W 560
safety glasses, ear protection and gloves.
CAUTION: DANGER OF INJURY!
Never point the spray stream towards human beings or animals.
Sockets and plugs must be masked. Risk of an electric shock as a
consequence of sprayed material entering the socket!
Attention! Never operate the device if the nozzle seal is either
damaged or missing. If the nozzle seal is either missing or damaged
liquids can enter the device and increase the risk of an electric shock.
Check the nozzle seal before each use.
•
When working with the W 560 indoors as well as outdoors ensure that no solvent vapors
are sucked in by the spray gun.
•
When working outdoors, be aware of the wind direction. Wind can carry the coating
substance across greater distances - thus causing damage. When working indoors, provide
for adequate ventilation.
•
Do not let children handle the device.
•
Never open the device yourself in order to carry out repairs in the electrical system!
The units may only be used with a functional valve. If paints rises in the
ventilating hose (Fig. 1, item 11) do not operate the unit further! Dismantle
and clean the ventilating hose, valve and diaphragm and replace the diaphragm
if necessary.
•
Do not lay the spray gun.
With original WAGNER accessories and spare parts, you have the guarantee that
all safety regulations are fulfilled.
4. Description/ Scope of delivery
1) Air Cap
3) Union nut
5) Trigger
7) Material volume adjustment
9) Mains lead
11) Ventilating hose
13) Stir stick
15) Perfect Spray 1400 spray attachment
17) Lubricating grease*
* This is inside the container: remove it before starting operations!
Description/ Scope of delivery (Fig. 1)
2) Nozzle
4) Spray gun front part
6) Spray gun rear part
8) Air filter cover
10) Container
12) Valve
14) Operating instructions
16) Replacement nozzle seal*
GB
19