Setup Menu „Setup1 - Sartorius Stedim Biotech CERTOMAT BS-T Mode D'emploi

3.3.5 Setup menu „SETUP1"
•
In pressing the [F3] key you change to the "setup1 menu".
•
All set-ups and modifications are memorized internally and remain active also after voltage loss or switching off and on!
CERTOMAT BS-T
08:53:27
MAN PROG
Fig. 32: main menu
Display contrast
•
Can be modified in pressing the keys [+] and [-].
In pressing the key [-] the contrast is so much reduced that no information is visible at the display!
The following parameters in the "setup1 menu" (fig. 33) can be adjusted:
F1
•
After the pressing of the [F1] key you come to the menu in which you adjust the menu language (German, English, French).
•
An arrow marks the respectively active language.
•
In pressing the keys [+] / [-] the arrow can be moved.
•
In pressing the [ENTER] key the respectively adjusted language is confirmed.
•
In pressing the [ESC] key you change again to the "setup1-menu". The language set-up before is now shown in the menus.
F3
< ESC
SETUP
MAIN
LANG.: Set-up of the menu language
>
LANG. DIAG.
CONTRA +/-
TIME SERVICE SETUP1
Fig. 33: setup1 menu
ALERTS
25